Skip to content

Metal panel roofing, run clean to the ridge.

Roofing & Metal Re-Roofs in Fresno County & the Foothills

Metal makes a lot of sense on Central Valley and foothill roofs. It sheds heat instead of holding it, it does not curl and granule off the way an aging composition roof does after fifteen Valley summers, and on foothill properties above Dunlap, Yokuts Valley and Orange Cove a non-combustible roof covering is one of the more meaningful things you can do to a house. The re-roof in the photo is ribbed metal panel run clean to the ridge, with the ridge cap and fasteners lined up the way they should be.

Ribbed metal roof panels running to the ridge on a completed re-roof, photographed at sunset below the Sierra foothills.

Roofing & Metal Re-Roofs

What this covers

Metal makes a lot of sense on Central Valley and foothill roofs. It sheds heat instead of holding it, it does not curl and granule off the way an aging composition roof does after fifteen Valley summers, and on foothill properties above Dunlap, Yokuts Valley and Orange Cove a non-combustible roof covering is one of the more meaningful things you can do to a house. The re-roof in the photo is ribbed metal panel run clean to the ridge, with the ridge cap and fasteners lined up the way they should be.

Sequoia Builders & Remodel is a California-licensed general contractor, CSLB #1160042. Roofing sits inside our building work — the roof on a house we frame, the re-roof that goes with an addition or a remodel, the metal panel job on an outbuilding or a structure we have worked on. Call or text (559) 480-9933 and describe what you have; we will tell you straight away whether it is work we can take on under our classification, and the estimate is free either way.

A note on scope: Sequoia Builders & Remodel is licensed by the CSLB under #1160042. In California, roofing classifications govern what a contractor may take on as a stand-alone job. We carry out roofing as part of the building work we do — new construction, additions, remodels and structures we have built. If you are calling about a stand-alone re-roof, tell us what you have and we will confirm honestly whether it is a fit for us before we quote it.

Process

How a Re-Roof Runs

  1. 01

    Get on the roof

    We look at the existing covering, the decking underneath, the flashings, the penetrations and the eave and ridge details before quoting anything.

  2. 02

    Scope and written estimate

    Tear-off versus overlay, any decking repair, underlayment, panel profile, color and trim — priced in writing.

  3. 03

    Tear-off, decking and underlayment

    Old covering off, bad decking replaced, underlayment down, and flashings and penetrations detailed before panels go on.

  4. 04

    Panels, trim and ridge

    Panels set to line, fastened to the schedule, then eave trim, rakes, valleys and ridge cap finished.

From the portfolio

Work like yours

See the full portfolio
  • Ribbed metal roof panels running to the ridge on a completed re-roof, photographed at sunset below the Sierra foothills.

    Metal Re-Roof

    Ribbed metal panels run clean to the ridge on a completed re-roof, photographed at sunset with the foothills behind.

Questions

Roofing & Metal Re-Roofs — asked and answered

  • Do you do stand-alone re-roofs?
    Tell us about the job and we will confirm before we quote. Roofing in California is governed by contractor classification, and we would rather tell you up front that a job is outside our scope than take it on and hand you a problem. Roofing that forms part of a remodel, an addition or a new build we do is straightforward.
  • Is metal a good choice for a foothill property?
    It is a common one, for two reasons: it reflects heat better than composition shingle through a Valley summer, and a metal covering is non-combustible. Local fire-hazard requirements vary by parcel, so check your own zone with the county.

Free estimate

Get a price on your roofing & metal re-roofs

No charge for the visit and no obligation. Tell us the town and roughly what you have in mind, and we will come out and put a written number on it.

Roofing & Metal Re-Roofs in your town

Also throughout Fresno County, Tulare County, Kings County, Madera County see every area we serve.

Request your free estimate

Tell us what you are planning and where you are. Required fields are marked with an asterisk.

Rough size, what you have in mind, anything you already know about the house.

We use your details only to reply to this request. No spam, and we never sell your information. Prefer to talk? Call or text (559) 480-9933.

Free estimates on roofing & metal re-roofs

Licensed CSLB #1160042, working across Fresno, Tulare, Kings & Madera Counties. Call or text (559) 480-9933 and we will arrange a visit.

Licensed CSLB #1160042 · Serving Fresno, Tulare, Kings & Madera Counties

Call UsText Us